Product Overview | Main Features | - Allows for remote viewing & recording over LAN or the internet through PC and mobile devices
- Simple to setup with a friendly graphical interface
- High image & video quality (Display resolution: 640 x 480 Pixels (300k Pixels))
- Includes wide-angle (3.6mm) lens
- Hardened weatherproof outdoor water-proof enclosure
- Infrared Motion Detection (with email notification and image upload via FTP)
- Night vision (up to 10 meters) via auto IR-LED illumination
- Multi-user access with password protection
- Supports the IE browser, Firefox as well as most other standard browsers including the standard Safari browser on the Iphone
- Wi-Fi compliant with wireless standards IEEE 802.11b/g. Wired connection is also included
- Supports both WEP & WPA Encryption
- Supports Dynamic IP Addresses such as through dyndns.org
- Has multi-level user management system with password protection
| 
| Important Information | This outdoor netcam is a perfect addition to any HomeSeer system. Since it's wireless, there's no need to run any cabling and the camera may be installed anywhere that's within range of your wireless router. Setup is quick and simple and HSTouch users will be able to display the view on any HSTouch client (Windows, Windows CE, iPhone, iPod Touch, iPad and Linux). |
| Specifications | - IEEE 802.11b/g
- 3.6mm wide-angle lens
- 640 x 480 resolution (300k px)
- Supports WEP / WPA Encryption
- Night Vision Range - 10 meters
|
| Downloads (Manuals / User Guides / Software) | |
| What's Included | - Wireless IP Camera
- Wi-Fi Antenna
- User Manual
- CD (Driver and camera tool)
- Network Cable
- DC Power Supply
- Mounting Bracket
- 1-year manufacturer's warranty
| More Information | Requirements | - PC with wired LAN connection required for configuring 802.11b/g settings
|
| Related Links (Photos / Videos / Diagrams / Forms) | |
| Comments / Notes | To get the IP address set, make sure you install the IP Camera finder tool that is on the included CD. Connect the camera to your network with an Ethernet cable, then run the camera finder tool on any PC on your network. This camera is supported in HSTouch. To add this camera to any HSTouch screen, add an image element to your screen and set the ImageURLNormal to:
http://CAMIP:80/snapshot.cgi?user=admin&pwd=pass
Replace "CAMIP" with the IP address of your camera. Change "admin" to the user you have set, and "pass" to the password. If you did not change any default settings, the user is "admin" and the password is blank.
Set the IsVideo property to TRUE so you get realtime video from the camera. |
| To learn more about the WIFICAM-O-W
Call 603-471-2816
Click Here to Report a Problem with this Page |
|