HomeSeer HSM100-EU-S2 Euro Z-Wave Multi-Sensor

Product Overview

Main Features

Includes Motion, Temperature, and Luminance Sensors
Battery Operated
May be used with HomeSeer to trigger events based on any combination of sensor data
New S2 unit includes internal tap for AC adapter (adapter not included)
Firmware is based on ZDK 4.53 library
This unit is for use with EURO Z-Wave Networks only

Important Information

HSM100™ a new HomeSeer Z-Wave® device featuring three-sensors-in-one! HSM100 is primarily intended as a motion sensor and is supported as a motion sensor by all Z-Wave certified systems. However, HSM100 can also function as a temperature sensor and light sensor when used with any HomeSeer system! Use it to control Z-Wave devices directly or trigger HomeSeer automation events for whole house control of Z-Wave and non Z-Wave automation products.

Motion Sensor

The sensitivity of the HSM100 motion sensor is fully adjustable, allowing pet owners to tweak the unit for best performance without false positives. The unit has a range of 30 feet and the sensor angle of view is 90° (horizontal). For best performance, mount the unit flush against a wall at a height of 6-8 feet. It is not necessary to point the unit downward. An exposed side-mounted button allows for easy unit testing and setup and the default setup cycle (10 min's) provides HomeSeer users and installers plenty of time to configure the unit.

Passive Infrared Sensor (PIR)
30 ft Range
90° Horizontal Angle Coverage
Adjustable Sensitivity (for 'pet friendly' operation)
Programmable Timeout (for 'no motion' detection)
LED Motion Indicator

Luminance Sensor

The illumination sensor of HSM100 can be programmed to work in tandem with HomeSeer software and controllers to ensure greater lighting accuracy under a wide variety of conditions. Use it to light rooms *before* 'sunset' on cloudy or overcast days. Use it to prevent 'on' commands when sufficient natural light is already available.

Detects the amount of light in the room
Lights stay off if there is sufficient natural light

Temperature Sensor

The temperature sensor of HSM100 can be used to adjust heating and cooling systems to keep the room comfortable. Use it also to monitor areas of concern where conventional thermostats are not installed.

32° - 104°F (0° - 40°C) Range
0.2°F Resolution

Battery Level

In addition to sensing motion, light and temperature, the HSM100 also monitors its own battery condition. Use this feature with HomeSeer to trigger email, phone or text to speech alerts if the battery drops below a certain (user definable) point.

Z-Wave Wireless RF Communication

Advanced Mesh Network Protocol
Includes 300 series Z-Wave chip
300 ft Range
40,000 bits/sec
Adjustable WakeUp Notification
Up to 4 Associated Z-Wave Nodes
Z-Wave Certified
FCC Approved

General

HSM100 is battery powered and needs no wires to operate. HSM100 can be wall mounted or simply placed on any flat surface. Battery lifetime typically exceeds one year but depends on the operating modes programmed.