Features

• Easy Temperature Setting
• Easy Mode Switching Buttons (HEAT/OFF/COOL)
• Easy Energy Saving Buttons (NORM/SAVE)
• Compatible with all Standard 24 Volt & Millivolt Systems
• Automatic Compressor Short Cycle Protection
• Z-Wave® Thermostat General VZ Device Class
• Fahrenheit or Centigrade Selectable
• Battery Back-Up with 2 x “AA” batteries (supplied)
• Low Battery Indicator
• Adjustable Temperature Calibration

The Wayne-Dalton Z-Wave® Enabled Thermostat also features:

• Support for all Z-Wave® controllers
• "Home" and "Away" programs via Z-Wave® or manual operation
• "Heat" and "Cool" modes via Z-Wave® or manual operation
• Temperature setting up or down via Z-Wave® or manual operation
• Sending the thermostat an OFF command enables energy saving mode, sending it an OFF command disables energy saving mode. This allows the thermostat to be controlled using any Z-Wave remote, even if it does not have thermostat support. 
  

Specifications:

• Supply: System Powered (“C” Wire)
• Target Temperature Range: 35°F (2°C) to 90°F (32°C)
• Display: Blue Backlit LCD Display
• Color: White

Network Specifications:

• Minimum Range: Indoor 50ft
• Frequency: 908.42 MHz
• Mesh Network: Each line powered node acts as a repeater to route distant signals.
• Size: 232 Z-Wave® Nodes

To use this thermostat with HomeSeer, make sure you download the free Z-Wave Thermostat Plug-in from the HomeSeer updater. This gives you full control of the thermostat including setting setpoints, setting the mode, and reading the current temperature.

Instruction Manual