|
|
|
|
|
Top > Hardware > Technology Interfaces > X10 > W800RF32A - X10 RF Receiver Kit (WGL) |
 |
W800RF32A - X10 RF Receiver Kit (WGL)
SKU: W800RF32A
RETAIL: $70.00PRICE: $68.95
|
|
W800RF32A - X10 RF Receiver Kit (WGL)
Description
|
| The W800RF32 family of RF receivers are designed to receive X10 RF signals generated from X10 products: Palm Pad remotes, key chain remotes, Hawkeye motion detectors, and many, many other X10 RF devices.
The W800RF32 then sends these commands directly to your computer's serial(RS232)port. This allows your computer to receive X10 RF commands from remotes and motion detectors directly, without having to broadcast any power line commands, thus minimizing power line clutter and improving home automation response times by bypassing the usual power line delay.
To use the W800RF32 you will need a dedicated computer (PC running HomeSeer) to interpret the received commands.
The W800RF32 receives:
- All 256 house/unit code addresses
- All regular X10 RF commands (on, off, dim, brighten, etc.)
- Extended RF commands, such as those transmitted by X10's “Entertainment Anywhere” remotes and X10 security modules such as the DS10.
|
Electrical |
|
Voltage |
7 - 12v DC
120v AC to 9v DC, 60hz wall mounted supply included |
|
Controller Current |
20 ma |
|
Receiver Frequency |
310mhz |
|
Receiver Range |
100 ft line of sight |
|
House/Unit Codes and
Supported Commands |
all 256 addresses, basic commands (On, Off, Bright, Dim, All Lights On, All Off), and all extended commands/functions |
|
Data Output Format |
RS-232, 4800 baud, 8 bit, no parity, 1 stop bit. |
|
Connections |
|
Power |
3.5 mm plug (center +) |
|
RS-232
|
DB9 female DTE pinout TD, RD, & SG |
|
Antenna
|
male F connector |
|
Mechanical |
|
Size |
2.5" x 1.7" x 1.0" |
|
Weight |
2 oz |
|
Included in Kit |
|
(1) W800 Receiver
(1) External Antenna
(1) 9 volt power supply
(1) coax cable | |
|
|
|
Email To Friend
|
|
|
 |
©
HomeSeer Technologies, LLC. All rights reserved. HomeSeer is a registered
trademark. |
|
|
|
|
|
|
|
|
|
