Overview
HSM100-EU™ a new HomeSeer Euro Z-Wave® device featuring three-sensors-in-one! HSM100-EU is primarily intended as a motion sensor and is supported as a motion sensor by all Z-Wave certified systems. However, HSM100-EU can also function as a temperature sensor and light sensor when used with any HomeSeer system! Use it to control Z-Wave devices directly or trigger HomeSeer automation events for whole house control of Z-Wave and non Z-Wave automation products. | | | Motion Sensor | | The sensitivity of the HSM100-EU motion sensor is fully adjustable, allowing pet owners to tweak the unit for best performance without false positives. The unit has a range of 30 feet and the sensor angle of view is 90° (horizontal). For best performance, mount the unit flush against a wall at a height of 6-8 feet. It is not necessary to point the unit downward. An exposed side-mounted button allows for easy unit testing and setup and the default setup cycle (10 min's) provides HomeSeer users and installers plenty of time to configure the unit. |  | 868.42 mhz Euro Z-Wave Device Passive Infrared Sensor (PIR) 30 ft Range 90° Horizontal Angle Coverage Adjustable Sensitivity (for 'pet friendly' operation) Programmable Timeout (for 'no motion' detection) LED Motion Indicator
| | Illumination Sensor (Requires HomeSeer System) | | The illumination sensor of HSM100-EU can be programmed to work in tandem with HomeSeer software and controllers to ensure greater lighting accuracy under a wide variety of conditions. Use it to light rooms *before* 'sunset' on cloudy or overcast days. Use it to prevent 'on' commands when sufficient natural light is already available. | | | | | Temperature Sensor (Requires HomeSeer System) | | The temperature sensor of HSM100-EU can be used to adjust heating and cooling systems to keep the room comfortable. Use it also to monitor areas of concern where conventional thermostats are not installed. | | | | | Battery Level | | In addition to sensing motion, light and temperature, the HSM100-EU also monitors its own battery condition. Use this feature with HomeSeer to trigger email, phone or text to speech alerts if the battery drops below a certain (user definable) point. | | | | Z-Wave Wireless RF Communication | 868.42 mhz Euro Z-Wave frequency Advanced Mesh Network Protocol Includes 300 series Z-Wave chip 300 ft Range 40,000 bits/sec Adjustable WakeUp Notification Up to 4 Associated Z-Wave Nodes
| | General | | HSM100-EU is battery powered and needs no wires to operate. HSM100-EU can be wall mounted or simply placed on any flat surface. Battery lifetime typically exceeds one year but depends on the operating modes programmed. | | | | | |
HomeSeer Screen Shot:
 | Install Guide:
HSM100 Installation Guide |
|