*How to Install a Plug-in!
A simple, no-nonsense guide to installing any plug-in into your HomeSeer system!
| |
AutomationCraft AC-RF2 Processor Software Plug-In
 The AC-RF2 processor plug-in is an application that enables HomeSeer software to process radio frequency commands and information via readily available serial or USB RF receivers.
$39.95
| |
BeakerStat WiFi Thermostat Software Plug-in
The BeakerStat software plug-in allows HomeSeer to control WiFi thermostats manufactured by the Radio Thermosat Company.
$39.95
| |
Blade BLDenon Software Plug-in
The BLDenon Plug-in for HomeSeer allows control of Denon A/V Receivers using an ethernet connection.
$29.95
| |
Blade BLNetCallerId Software Plug-in
The BLNetCallerId Plug-in for HomeSeer allows the user to retrieve the CID information from the NetCallerId box.
$29.95
| |
Blade BLNinjaControl Software Plug-in
The BLNinjaControl Plug-in for HomeSeer allows the user to control the X10 Ninja Pan and Tilt bases.
$29.95
| |
Blade BLPowerMonitor Software Plug-in
The BLPowerMonitor Plug-in for HomeSeer will monitor your power usage using multiple Brultech monitors, such as the ECM-1220 and ECM-1240.
$29.95
| |
Blade BLRadar Software Plug-in
The BLRadar Plug-in for HomeSeer will give YOU maximum control over your motion sensors and lighting in your home with feaures like, active zone devices, directional movement devices, custom scripting and much more
$29.95
| |
Blade BLRouterMonitor Software Plug-in
The BLRouterMonitor Plug-in for HomeSeer allows the user to monitor the incoming and outgoing traffic on their router. It will also allow event triggers to be added to act on the router logging.
$29.95
| |
Blade BLRussound Software Plug-in
The BLRussound Plug-in for HomeSeer communicates with the Russound system.
$29.95
| |
EZFlora Insteon Irrigation Controller Software Plug-in
This software plug-in is designed to allow HomeSeer systems to control SimpleHomeNet EZFlora irrigation controller through the MNSandler Insteon PLM plug-in.
$29.95
| |
HiTec Homes DenonAVR Software Plug-in
This is a .NET2 plugin to allow serial port control of a Denon Audio/Video Receiver's from HomeSeer 2.
$39.95
| |
HomeSeer ADIO-100 Software Plug-in
 This software plug-in is designed to allow HomeSeer HS2 and HSPRO to integrate with the HomeSeer ADIO-100 analog / digital system interface.
$39.95
| |
HomeSeer Centralite LiteJet Software Plug-in
This plug-in is designed to allow HomeSeer HS2 and HSPRO to monitor and control Centralite's LiteJet lighting system.
$99.95
| |
HomeSeer Current Cost ENVI Software Plug-in
This software plug-in is designed to allow HomeSeer HS2 and HSPRO to monitor energy usage with the Current Cost "ENVI" device.
$39.95
| |
HomeSeer DSC Alarm Panel Software Plug-in
This plug-in allows HomeSeer to monitor and control DSC MaxSys and Power Series security panels.
$39.95
| |
HomeSeer Global Cache GC100-iTach Software Plug-in
This interface to the GC-100 allows HomeSeer to control home audio and video equipment via infrared remote control commands. Requires the GC-100 network adapter.
$39.95
| |
HomeSeer HAI Panel Software Plug-in
This plug-in adds support for the HAI Omni and compatibles security panel. It includes support for all the security features of the panel as well as HAI thermostats.
$39.95
| |
HomeSeer HSTouch Android Software Plug-in
This plug-in is designed to work with HSTouch and allows users to control their homes via Android devices.
$39.95
| |
HomeSeer HSTouch IOS Software Plug-in
This plug-in is designed to work with HSTouch and allows users to control their homes via iPhone®, iPod® Touch or iPad®.
$39.95
| |
HomeSeer Ligholier Compose Plug-in
This plug-in adds support for the Lightolier Compose lighting systems. With this plug-in users can now control all their scenes from any web browser or telephone. Freindly names may be assigned to Compose scenes.
$39.95
| |
HomeSeer Lutron Homeworks Plug-in
This plug-in adds support for the Lutron HomeWorks lighting control system. Automation actions, events, and conditions are added.
$99.95
| |
HomeSeer Lutron RadioRA Plug-in
$99.95
| |
HomeSeer Napco Gemeni Alarm Panel Plug-in
Allows HomeSeer to control the Napco Gemini security panel.. An image of your keypad is available via web page and will shows the current system status. Requires Napco Gemini security panel with GEM-AUTO upgrade.
$39.95
| |
HomeSeer NuVo Plug-in
Allows HomeSeer 2-way monitoring and control of NuVo Grand Concerto and Essentia G systems.
$99.95
| |
HomeSeer OnQ Panel Plug-in
This plug-in adds support for the OnQ HMS security and automation panel. It includes support for all the security features of the panel as well as OnQ thermostats.
$39.95
| |
HomeSeer Russound Plug-in
Allows HomeSeer 2-way monitoring and control of Russound CAV6.6, CAM6.6, CAA66, or CAS44 systems.
$99.95
| |
HomeSeer Square Connect Blaster Software Plug-in
This interface to the Square Connect Blaster allows HomeSeer to control home audio and video equipment via infrared remote control commands. Requires the Square Connect Blaster.
$39.95
| |
HomeSeer Stargate Panel Plug-in
This plug-in is designed to allow HomeSeer HS2 and HSPRO to monitor and control functions of the JDS Stargate controller.
$59.95
| |
HomeSeer TED Plug-in
This software plug-in is designed to allow HomeSeer HS2 and HSPRO to monitor energy usage with the T.E.D. device. Requires the TED hardware and "Footprints" sofware also.
$39.95
| |
HomeSeer UPB Software Plug-in
The UPB software plugin for HomeSeer 2 adds complete UPB (Universal Powerline Bus)support to HomeSeer. UPB is a fast, flexible and ultra-reliable powerline communication method.
$39.95
| |
HomeSeer Webcam Plug-in
Allows a HomeSeer event to create snapshots from a compatible camera. Example: use with a motion sensor to create & send snapshots instantly to any email address!
$39.95
| |
HomeSeer WGL Rain8/Relay8 Plug-In
Allows for control of the RS232 versions of the Rain8Net and the Relay8Net hardware interfaces.
$39.95
| |
ISY Plug-In
This software plug-in allows HomeSeer systems to monitor and control Insteon products connected to a Universal Devices ISY controller. (includes software only)
$59.99
| |
LaManSoft SageTV Plug-In
InControl is a HomeSeer HS2 / HSPRO plugin for SageTV. It provides a real-time interactive interface between SageTV and Homeseer.
$29.95
| |
LaManSoft Windows Phone 7 Plug-In
InControl For Windows Phone 7 includes HomeSeer and Windows Phone 7 plugins that work together to provides a real-time, interactive interface between your Microsoft Windows Phone 7 and Homeseer.
$19.95
| |
MNSandler Insteon PLM Plug-in
This software plug-in is designed to allow HomeSeer systems to control Insteon devices through the Smarthome PLM 2412 and 2413 series controllers.
$59.95
| |
Onkyo / Integra Plug-in (TWA)
The TWA Onkyo/Integra Plug-in for HomeSeer allows control of Onkyo or Integra A/V Receivers using an ethernet or serial connection.
$29.95
| |
RFXCOM Processor Plug-In
$39.95
| |
Roku Soundbridge Plug-In
$39.95
| |
Sage Insteon Thermostat Plug-in
This software plug-in is designed to allow HomeSeer systems to support the Insteon 2441V Thermostat Adapter. It supports one to many thermostats in an installation.
$29.95
| |
Sage Media Center Control Plug-in
The Sage MC Controller plug-in is a .NET plug-in for HomeSeer that allows you to control one or more windows media center systems or extenders
$29.95
| |
Sage WebCamXP Plug-in
The Sage WebcamXP plug-in is a .NET plug-in for HomeSeer that allows you to interface to the WebcamXP server to control many of the server level and camera level functions.
$29.95
| |
SimpleHomeNet Software Plug-in
This plug-in provides support for the SimpleHomeNet EZIOxx line of Input/Output devices.
$49.95
| |
Sonos Controller Plug-in
This software plug-in is designed to allow HomeSeer systems to control Sonos players.
$39.95
| |
Spud AirplaySpeak Software Plug-in
This software plug-in is designed to allow HomeSeer systems to send annoucements to AirPlay capable devices
$29.95
| |
Squeezebox Plug-In
$39.95
| |
Stipus Bluetooth Connector
The Bluetooth Connector allows HomeSeer to react to the proximity of any Bluetooth device. If you always carry a Bluetooth phone, HomeSeer knows if you are home or away.
$29.95
100+ available
| |
Stipus PLCBUS Connector Plug-In
This plugin interfaces HomeSeer with the PLCBUS interface PLCBUS-1141 available from http://www.x10-hk.com PLCBUS-1141 interfaces from other vendors are not supported, as the plugin requires a specific firmware.
$39.95
| |
Teleinfo Plug-in for use in France
The aims of this plug-in is to import data collected from the electrical counter to HomeSeer : 1 device is created by item found in the teleinformation frame.
$29.95
| |
TiVo® Plug-In
This plug-in allows Series2™ or Series3™ TiVo® DVRs with network connectivity and the Home Media Option™ on the same home network that HomeSeer is on to control their HomeSeer devices and trigger HomeSeer events.
$69.95
| |
UltraJones Ultra1Wire2 HSPI Plug-in
This plug-in is designed to work with a 1-Wire Host Adapter to monitor 1-Wire digital thermometers. Database support is built-in.
$39.95
| |
UltraJones UltraGCIR Plug-in
This software plug-in is designed to allow HomeSeer systems to control Global Cache IR controllers.
$39.95
| |
UltraJones UltraPioneerAVR Plug-in
This software plug-in is designed to allow HomeSeer systems to control all the function of the Pioneer Receivers.
$39.95
| |
WAPSeer Plug-In
XHTML web interface for HomeSeer. For cell phone browsers, PocketPCs, PalmOS, etc.
$29.95
| |
WEB-networks DeviceLogger Continuous
Logs Device Data
$29.95
| | | |